Home › Free Forms › Landlord-Tenant Forms Library › Inspection Checklist

Free Rental Property Inspection Checklist

This Rental Property Inspection Checklist overview
▶ Watch overview

Room-by-room condition record — the dated, signed document both parties complete at move-in and move-out. It is the evidence that resolves security deposit disputes.

Inspection Checklist Move-In / Move-Out All 50 States & DC Free Fillable PDF
Updated Q3 2026 By Tenant Screening Background Check Editorial Team Reviewed for All 50 States & DC ~9 min read

A rental property inspection checklist is the room-by-room record of a unit’s condition that a landlord and tenant complete together at move-in and again at move-out. It exists for one reason above all others: it is the evidence that resolves security deposit disputes. A dated, signed move-in record documents exactly how the unit looked before the tenancy, so at the end a landlord can only deduct for damage beyond normal wear and tear — not for the ordinary deterioration that comes with living in a home. Complete it with the tenant present, photograph every room, both parties sign, and each keeps a copy. Repeat the process at move-out and compare the two records side by side.

Inspection Checklist at a Glance

Document

Condition Checklist

Completed

Move-In & Move-Out

Signed By

Landlord & Tenant

Required

Best Practice

Bottom line: The checklist is only useful if it is thorough, dated, photographed, and signed by both parties. Walk through every room, record the condition of each surface and system, capture timestamped photos, and give the tenant a copy. Without a move-in record, a disputed deduction is very hard to defend.

Document with dated photos and get both signatures

A checklist that is vague, unphotographed, or unsigned protects no one. Walk through every room with the tenant present, write specific condition notes, take dated photos or video of each area and every existing flaw, and have both parties sign. Provide the tenant a copy and retain the original. This is what turns the checklist into usable evidence at move-out.

How the Inspection Checklist Works

Move-In to Move-Out Playbook

Schedule the walkthrough

Complete the checklist at move-in before the tenant brings in belongings, and again at move-out after they remove them. Both parties should be present for each walkthrough.

Inspect every room and system

Go room by room. Record the condition of walls, floors, ceilings, windows, doors, appliances, plumbing, electrical fixtures, and smoke and carbon monoxide detectors.

Photograph and date everything

Take dated photos or video of each room and every existing flaw. Timestamped images are the strongest evidence of condition and back up your written notes.

Both parties sign and keep a copy

The landlord and tenant sign and date the completed checklist, and each retains a copy. A signed record is far harder to challenge later.

Compare at move-out

Repeat the same inspection when the tenant leaves and compare it against the move-in record. Deduct only for changes beyond normal wear and tear, per your state’s deposit rules.

Build Your Inspection Checklist

Complete the fields below to generate a room-by-room rental property inspection checklist as a printable PDF. Fill in the parties and property, choose whether this is the move-in or the move-out walkthrough, then rate the condition of each area and add notes. The generated document mirrors a professional condition report, so you can print it, walk the unit, and have both parties sign. For a deeper written walkthrough of the process, see our free landlord-tenant forms library.

What this generates

A dated condition report listing every room and system with its rating and notes, a wear-and-tear reminder, and a signature block for both parties. Keep it with your timestamped photos and your signed lease.

1. Parties & Property

Landlord / Property Manager

Tenant & Rental Unit

2. Inspection Details

3. Room-by-Room Condition Grid

For each area, choose a condition rating and add a specific note (for example: “1-inch nail hole in north wall, plaster intact”). Blank rows are skipped in the PDF.

Area / SystemConditionNotes & existing flaws
Walls
Floors
Ceilings
Windows
Doors & Locks
Kitchen Appliances
Cabinets & Counters
Bathroom Fixtures
Plumbing
Electrical & Outlets
Heating & Cooling
Smoke / CO Detectors

4. Documentation & Acknowledgments

5. Signatures

Wear and Tear vs. Tenant Damage

The single most litigated question at move-out is whether a flaw is normal wear and tear or tenant damage. The distinction decides who pays. Under U.S. Department of Housing and Urban Development guidance for its assisted-housing programs, an owner may charge a tenant only for damage beyond normal wear and tear caused by the household or a guest — and may not charge for the ordinary deterioration that comes from living in a home (see HUD’s Housing Quality Standards and special-claims guidance). The routine cost of cleaning and minor repairs to ready a unit for the next tenant is treated as a landlord’s cost of doing business, not a deductible charge.

Normal wear and tear is gradual and expected. It is what happens to any home over months and years of ordinary occupancy, regardless of how careful the tenant is. Damage is different in kind, not just degree: it results from negligence, carelessness, accident, or abuse, and it goes beyond what ordinary use would produce. Courts and housing authorities look at the nature of the flaw, the length of the tenancy, and the remaining useful life of the item. HUD’s own guidance uses a proration example: if carpet with a five-year life expectancy has to be replaced two years early because of tenant use, the tenant should not be charged more than the proportion of remaining life — roughly two-fifths of the replacement cost in that example, not the full amount.

AreaNormal wear and tear (landlord’s cost)Damage (may be deductible)
Walls & paintFaded paint, minor scuffs, small nail holes from hanging picturesLarge holes, unapproved paint colors, crayon or marker, deep gouges
Carpet & floorsWorn traffic paths, light matting, minor fadingPet stains and odor, burns, rips, tears, missing sections
Doors & windowsLoose handles, sticky latches from age, worn weatherstrippingBroken glass, cracked doors, holes punched through, ripped screens
Appliances & fixturesWorn finish, mineral buildup, aged sealsBroken racks, missing parts, cracked basins, damage from misuse
CleanlinessOrdinary light soiling addressed by routine turnover cleaningExcessive filth, grease, trash left behind, or biohazard conditions

Because the line can be genuinely close, the checklist and its dated photos are decisive. A move-in record that shows a wall was already scuffed means that scuff cannot be charged to the tenant later. A move-out record that shows a new fist-sized hole where the move-in photo showed intact drywall makes the deduction easy to justify. The document does not change the law; it supplies the proof the law asks for. For a fuller discussion of the standard your state applies, review the security deposit laws for your state before finalizing any deduction.

Room-by-Room: What to Inspect

A thorough walkthrough covers every surface and every system a tenant will use. Move methodically through the unit so nothing is missed, and record a specific note for each area rather than a single word. The generator above follows this same order.

Walls, Ceilings, and Floors

Check walls for holes, scuffs, cracks, and the condition of the paint. Note existing nail holes so they are not later mistaken for new damage. Inspect ceilings for water stains, cracks, or discoloration that could signal a past leak. For floors, distinguish carpet, hardwood, laminate, and tile, and record traffic wear, stains, scratches, and any loose or missing pieces. Worn carpet paths are wear and tea